Sweetcrispy Twin Bed Frame with Headboard and Footboard, Heavy Duty | 14 Inch High Metal Platform Bed Frame, 550 lbs Weight Capacity, No Box Spring Needed, Twin Size, Rustic Brown

$69.93

15 Items sold in last 3 days
31 People watching this product now!
Description
  • Headboard and Footboard, Finished at Both Ends: A bed frame with a headboard and a footboard reads as furniture from the doorway, not an open metal rectangle, and that matters most in a guest room, a kids room or a first apartment, where a bare frame looks like a mattress on legs. The wood-grain panel gives you something to lean on with a pillow; the shorter one stops the mattress creeping. Both are pre-drilled and bolt on with the key in the box
  • Rated for 550 lbs, Braced at the Center: A heavy duty bed frame fails in two places, the corners and the middle, so this one is braced against both. The perimeter is welded rather than bolted at the corners, five cross supports run the full width, and a center rail with extra legs carries the span of a twin deck. The 550 lb figure is a static load spread across that deck the way a body spreads it
  • No Box Spring Needed, Slats That Hold Foam: This is a platform bed frame in the literal sense: the mattress rests on the slats, not on a box spring, which saves the cost and the 9 inches a foundation adds. Slat spacing suits memory foam, latex, hybrid and spring mattresses from 8 to 12 inches, so a low-profile pad sits on the deck instead of sinking between the bars, and air keeps moving underneath
  • 14 Inches of Clearance, 12.4 Inches You Can Use: The side rail sits 14 inches off the floor at the top edge, and the clear opening below it measures 12.4 inches to the bottom edge, which is the number to trust when sizing under bed storage, because that is the gap a bin has to pass. A 12 inch lidded tote slides under without tilting, and the sides are open, so you pull it out from the edge. No drawers to jam, just space you can see and reach
  • Quiet Nights, Easy Assembly in About 40 Minutes: EVA gaskets sit between every metal part that touches another, and non-slip strips hold the slats, so the frame does not squeak at 3 a.m. the way a hook-together frame does. Assembly takes about 40 minutes for two people, with hardware in labeled bags matched to numbered steps and every hole pre-drilled. Tighten once at assembly and again after the first week, and it stays quiet
Additional information
BrandSweetcrispy
ManufacturerSweetcrispy
BindingKitchen
Product GroupFurniture
EAN6980227841300
Part NumberDASW-GMC5130-DJT-RT
ModelDASW-GMC5130-DJT-RT
ColorRustic Brown
Product Dimensions78.23 x 39.37 x 38.98 inches
Item Weight36.38 pounds
SizeTwin
Number Of Items1